MINI-JECTOR

INJECTION MOLDER

If you are not shop trained, or have not completed MAS 863: "How to Make Almost Anything", DO NOT USE THIS MACHINE

If you do not know how to use this machine, or are uncertain about using any of its tools or functions, ask a trained user before continuing.

This machine is dangerous:

  1. Always wear safety goggles, sturdy shoes, gloves, and appropriate clothing.
  2. This machine ejects MOLTEN (HOT!!) plastic, do not touch the plastic, wear protective gloves, and beware of hot metal surfaces
  3. Never place your hands below the ejector nozzle
  4. Always purge machine and use fresh plastic. Old plastic absorbs moisture which can superheat and cause small explosions
  5. LISTEN to the machine. If it doesn’t sound right, you are doing something wrong, or something needs fixing.
  6. Always clean up after yourself, return the tools, and leave the machine in better condition than when you found it.
  7. IMMEDIATELY order and replace any broken tools or parts.
  8. Ensure the emergency stop button is depressed and machine is turned off before leaving.

THESE ARE SHARED FACILITIES. YOU TOO CAN BE A RESPONSIBLE SHOP USER