Skip to content
Publication

Electrospun Architecture: Upscaling Algae-Derived Nanofibers into Tensile Membranes

 Critical Matter Group

Mutis, Sergio, Wai Lok Wan, Michelle Liang, Avantika Velho, Yuxiang Cheng, and Behnaz Farahi. "Electrospun Architecture: Upscaling Algae-Derived Nanofibers into Tensile Membranes." ACADIA 2026: Humanism Recoded, Proceedings of the 46th Annual Conference of the Association for Computer Aided Design in Architecture, 2026.

Abstract

As architecture confronts material scarcity and ecological degradation, new fabrication paradigms are needed that minimize deposited mass while maximizing spatial surface area. Robotic electrospinning offers a distinctive answer: lightweight, materially-efficient, anisotropically aligned nanofiber membranes grown in situ over a reusable conductive structure, where the electrostatic field encodes both global geometry and local fiber orientation. This paper introduces Electrospun Architecture, a method that translates field-conditioned nanofiber deposition from sub-meter laboratory artifacts to architectural enclosures. By treating bent metal tubes as electric field intensifiers and orchestrating robotic orbital toolpaths around them, the system programs fiber alignment while letting material-efficient membrane surfaces emerge from the equilibrium of electrostatic attraction and fiber tension, not from prescribed CAD geometry. The work advances four contributions: (1) a robotic platform paired with a reusable aluminum kit of parts that scale geometry- and orientation-conditioned electrospinning to architectural span; (2) an algae-based formulation validating marine biopolymers for electrospinning and future biomass upcycling; (3) a dynamic span analysis that characterizes the observed bridging envelope under the tested formulations and fabrication conditions; and (4) the Electrospun Pavilion, a full-scale translucent interior vault in which algae and PVA nanofiber membranes are grown over a reusable bent-aluminum structure. At end-of-life the membrane is dissolved by water spray, releasing the aluminum rods for re-deposition: a fabrication economy of minimized mass, reusable structural assemblies, and bioregional material pathways.

Related Content